Grease
TECHNOFLUID LITHIUM GREASE AP3 & APLR
Grease
TECHNOFLUID Lithium Grease is a high-performance, multi-purpose grease formulated using high-quality mineral base oils and lithium soap thickener.
Designed to provide excellent lubrication and protection over a wide range of operating temperatures.
Exhibits good mechanical stability and resistance to oxidation, ensuring consistent performance during extended service.
Suitable for both automotive and industrial applications requiring reliable bearing lubrication.
Key Benefits
Excellent anti-wear properties reduce friction and bearing wear.
Good thermal and oxidation stability extends grease life.
Provides effective rust and corrosion protection.
Good water resistance ensures dependable lubrication in moderately wet conditions.
Maintains consistency under mechanical stress.
Reduces maintenance frequency and downtime.
Applications
Recommended for lubrication of:
Wheel bearings
Electric motor bearings
Plain and rolling bearings
Automotive chassis and joints
Industrial machinery bearings
Suitable for low to moderate speed and load conditions.
Typical Uses
Automotive and commercial vehicle lubrication.
General industrial greasing applications.
Bearings operating under moderate temperatures and loads.
Operating Characteristics
Good pumpability in centralized lubrication systems.
Compatible with commonly used bearing materials and seals.
Stable structure ensures long service intervals
Specifications
| Characteristics | Test Method | Test Method | TECHNOFLUID AP3 | TECHNOFLUID APLR |
|---|---|---|---|---|
| Appearance | Visual | Visual | Smooth, fibrous | Smooth, fibrous |
| Colour | Colour | Visual | Yellowish White | Dark Green |
| Thickener Type | Thickener Type | — | Lithium Soap | Lithium Soap |
| Base Oil Type | Base Oil Type | — | Mineral | Mineral |
| NLGI Grade | NLGI Grade | ASTM D217 | 3 | 3 |
| Worked Penetration (60 strokes), 0.1 mm | Worked Penetration (60 strokes), 0.1 mm | ASTM D217 | 220 – 250 | 220 – 250 |
| Drop Point, °C (Min) | Drop Point, °C (Min) | ASTM D2265 | ≥ 180 | ≥ 180 |
| Base Oil Viscosity @ 40°C, cSt | Base Oil Viscosity @ 40°C, cSt | ASTM D445 | 150 – 220 | 150 – 220 |
| Four Ball Weld Load, kg (Min) | Four Ball Weld Load, kg (Min) | ASTM D2596 | 250 | 250 |
| Wear Scar Dia, mm (Max) | Wear Scar Dia, mm (Max) | ASTM D2266 | 0.50 | 0.50 |
| Copper Corrosion (24 hrs @ 100°C) | Copper Corrosion (24 hrs @ 100°C) | ASTM D4048 | 1a | 1a |
| Water Washout @ 79°C, % loss (Max) | Water Washout @ 79°C, % loss (Max) | ASTM D1264 | ≤ 4 | ≤ 4 |
| Rust Prevention | Rust Prevention | ASTM D1743 | Pass | Pass |
| Mechanical Stability (Worked, 100k strokes) | Mechanical Stability (Worked, 100k strokes) | ASTM D217 | Good | Good |
| Operating Temperature Range, °C | Operating Temperature Range, °C | — | -20 to 140 | -20 to 140 |